Section 3 - Construction Standards

Print
Press Enter to show all options, press Tab go to next option

Sections

Section 3.1 - Clearing - Last update November 2020

Section 3.2 - Grubbing and Stripping - Last update November 2020

Section 3.3 - Culverts - Last update November 2020

Section 3.4 - Trenching and Backfilling - Last update November 2020

Section 3.5 -Watermains - Last update November 2020

Section 3.6 - Forcemains - Last update November 2020

Section 3.7 - Storm and Sanitary Sewer Mains - Last update December 2020

Section 3.8 - Water Service Connections - Last update November 2020

Section 3.9 - Sewer Service Connections - Last update November 2020

Section 3.10 - Adjustment of Appurtenances - Last update November 2020

Section 3.11 - Subgrade Preparation - Last update November 2020

Section 3.12 - Granular Base Course - Last update November 2020

Section 3.13 - Granular Sub-base - Last update November 2020

Section 3.14 - Granular Surface Works - Last update November 2020

Section 3.15 - Curb, Gutter, Sidewalks and Interlocking Block Pavers - Last update November 2020

Section 3.16 - Permanent Linemarking - Last update November 2020

Section 3.17 - Hot Mix Asphalt - Last update November 2020

Section 3.18 - Warm Mix Asphalt - Last update November 2020

Section 3.19 - Prime Coat and Tack Coats - Last update November 2020

Section 3.20 - Seal Coats and Fog Coats - Last update November 2020

Section 3.21 - Traffic Control and Street Identification SignsLast update November 2020

Section 3.22 - LandscapingLast update November 2020

Section 3.23 - Supply and Delivery Asphalt EmulsionLast update November 2020

Section 3.24 - Bituminous Surface Treatment Single Application Last update November 2020

Section 3.25 - Material Specifications for Bituminous Surface Treatment AggregateLast update November 2020

Section 3.26 - Minimum Test FrequencyLast update November 2020